A Basic Guide For How To Make A DIY Electric Hydraulic Press

by Stephen Ellison
0 comment

In China, DIY electric hydraulic presses are pretty popular. The best electric hydraulic press manufacturers also provide DIY kits for clients to produce their DIY hydraulic presses. The process of making a DIY hydraulic press is quite simple. This write-up provides some tips for how to make the DIY electric hydraulic press.

Tips for making DIY electric hydraulic presses

Embarking on a DIY project for making electric hydraulic presses is not an easy task. However, it is also not as complex as most people assume. Therefore, there is no need to feel intimidated about the process. Below are some tips that would come in handy;

1. Start by gathering the components

When building a DIY electric hydraulic press, the first thing you should do is gather all the components you will need. The following are some of the things you must-have for your electric hydraulic press;

  • Large and small syringes
  • Two valves
  • Plywood
  • Glass jar
  • Drill
  • Glue gun
  • Saw (hack or reciprocating)

Note that the items you will need for the process depend on the type and size of the electric hydraulic press you want to make.

2. Determine the type of frame and its dimensions

The frame is one of the primary components of a hydraulic press as it holds all the other components. The frame also determines the quality of the press, including its strength and durability. Therefore, you must be careful when determining the frame dimensions and type of frame you will need. Once you have already determined these elements, you can start constructing the frame. Here, you will need the piece of plywood. Cut it into four pieces, depending on the pre-determined dimensions. You will need a drill to join these pieces together.

3. Construct the jack support

Once you have built the frame and the base, the next step is to construct the jack support. Doing this is quite simple. You will need some pieces of wood cut into small and long cylindrical pieces. The pieces need to be measured and pre-determined.

4. Construct the bed

The bed is one of the essential components of the electric hydraulic press. This is the easiest part of a hydraulic press to build. It does not require a lot of work and is not complex at all.

5. Exercise precision when adding the syringes

Once you have completed all the steps above, the next thing is to add the syringes. The large syringes should be mounted at the base to provide a mechanical advantage. Note that one large syringe would not be sufficient. This is especially the case if you are building an enormous hydraulic press. The size of the press will determine the distance between the syringes. Next, you have to install the small syringe. One small syringe should be sufficient.

Other critical steps

Other vital steps for making a DIY electric hydraulic press are;

  • Constructing the valves and pump
  • Testing the press to see if it is performing as it should
  • Making the necessary changes

Conclusion

Once you have successfully constructed your DIY electric hydraulic press, you must carefully test the product. This way, you can ensure that the product functions as it was designed.

You may also like

Leave a Comment